Hebster52
13 years ago
The manifolds are stock type-3 dualport manifolds. (The base engine is a 1600 dualport type-3 with 88mm slip-in's)
The HebsterWerks.
Hebster52
13 years ago
Removed the frontseats and started dismantling the small parts in the dash etc. prior to repaint. Had to peak under the floormats to check the floorpans too..

Looks pretty rotten to me... ;)

UserPostedImage
UserPostedImage

I have never seen a beetle door that have had a plastic foil behind the doorpanels before either...

UserPostedImage

To top it all the PO had appearantly "sealed" the fenderbeading with vaseline!!!

UserPostedImage

Getting ready for repaint.

UserPostedImage
The HebsterWerks.
pre67vw
13 years ago

The manifolds are stock type-3 dualport manifolds. (The base engine is a 1600 dualport type-3 with 88mm slip-in's)

Hebster52 wrote:



Engine looks great, why do you need 20mm spacers and what did you do about the balance pipe?
Rob Amos
Happiness is a stock VW
Hebster52
13 years ago
Needed the spacers to lift the carbs some to make room for the sparkplug cables as the accelerator arms etc. hit the cables. Also with the spacers I didn't need to make the neck on the 30hp aircleaners 10cm long to fit the original fanshroud. Had to be able to turn the aircleaners backwards. (forward of the vehicle) Otherwise the aircleaners would be to wide to fit the enginebay.

If I would have used a narrower 30hp fanshroud I could have managed without the spacers and also make the now 45mm long necks even shorter too.
The HebsterWerks.
Hebster52
13 years ago
The linkages in the Werks.. :)

UserPostedImage

UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
Finished the carb linkage.

UserPostedImage

Started preparing for the transformation yesterday.. :)

UserPostedImage

The HebsterWerks.
Hebster52
13 years ago
Sanded off the spraycan Seesand off the fender and also paintstripped the area where I had hammered out a big dent.

I think I did get the dent out pretty good.

UserPostedImage
UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
Testfitted the parts in the painted dash. Looks ok.
UserPostedImage

All surfaces sanded with P800 and the fenders in primer.
UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
This morning:
UserPostedImage
UserPostedImage

In the afternoon:
UserPostedImage
UserPostedImage

Looks almost like a Kommanderwagen here... :lol:
UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
Engine finished. Just need to buy a new fanbelt and mount it to the not yet finished testing bench so I can test start it in the bench. 😎

UserPostedImage
The HebsterWerks.
pre67vw
13 years ago
Lookin' good!
Rob Amos
Happiness is a stock VW
Hebster52
13 years ago
Time is runing out... It have to be ready to run June 7th when we start the drive to Bugrun in Sweden...

UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
UserPostedImage

UserPostedImage

UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
It's alive!! :D


The HebsterWerks.
54 Gertie
13 years ago
Wow, looks stunning. 😎

Good luck getting it ready in six days mind. :wink: :beer:
William
Hebster52
13 years ago
Rolled out the last time without an engine.

UserPostedImage

All my measuring during the winter seems to have paid out. The aircleaners do fit in the enginecompartment. :D

UserPostedImage
The HebsterWerks.
Hebster52
13 years ago
Engine finished! Just need some tuning to run smooth. All fitted inside the very tight enginebay... :)

UserPostedImage

Here it sits now after I brought it home from the garage.
Was out driving with it today too. Real fun driving a bug again! :D

The car itself still need some details done to it too.

UserPostedImage
The HebsterWerks.
59 Ragtop
13 years ago

Great work. Driving it again must make the long hours worthwhile
Hebster52
13 years ago
A few photos as it was two weeks ago when we were to Sweden on Bugrun with it.

UserPostedImage
UserPostedImage

My family waiting for the ferry back home to Finland:
UserPostedImage
UserPostedImage

Tonight I mounted the bumpers back onto it prior to the annual MOT inspections. Will probably keep the bumpers on afterwards too. Just wanted to have some fun with the T-bars I had made just for the Bugrun. Was supposed to make one set for a friend of mine so I made me one set too.. :D

UserPostedImage
UserPostedImage
The HebsterWerks.
CNE789
13 years ago
Excellent result, you should be proud of! I really like the subtle changes, nice in line with its orginal looks.

H.

Searching information about Beetles in military service - especially post-war.