54 Gertie
14 years ago
Hello all

I recently removed and repaired the area in the photo below, under where the rear most LHS gutter would sit (if it wasnt rotten).

I moved the wiring loom out of the way whilst I was grinding/welding and stupidly did not take a photo for reference as to how it enters the engine bay.

Here is the loom as it is now.

UserPostedImage

Does it enter through either hole A or B?

UserPostedImage


I could do with knowing before I weld the new gutter section back on.

Thanks :beer:
William
Sponsor
Log-in to remove these ads