• Laggy
  • Guest Topic Starter
18 years ago
Hello all,

I just rescued a 66 bug that sat for the most part of 10 yrs.
I got it started and it ran fine for a few weeks.
But now when I start it it dies after a few seconds.
Extra gas is coming from the float area and flooding the car.
I cleaned the float and made sure all was clean(wasnt that dirty)
Put the carb back on and it ran well for 30 secs or so then flooded out again.
So wahts the deal............. vacuum?
there is also the gas regulator thing that the float hits, could that be defective?


Log-in to remove these ads