English German
Login Register
ianmac
13 years ago

Does anyone know where I can source a set of early 4 bolt wheel cylinders for my '51, the only place I have found so far is Kaefer Nostalgie but at $700 for a set of 4 :omg: I don't think so....
Sponsor
Log-in to remove these ads
ianmac
13 years ago
early 356 ones look the same.... just as expensive :shock:
heb623
13 years ago
Welcome to the world of Beetle restoration!!!:shock:

:twisted: ET

Look here one time:
https://klasse356.secure.gearhost.com/catalog/showItems.asp?Category=BRW 
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
69project
13 years ago
i know its probably frowned upon but i just fitted oval ones as they were so expensive!
Car less.....
heb623
13 years ago
Just like gentlemen who prefer blondes,:oops: purists prefer original:omg: !!!
Just shop around a little bit and you still can do deals:roll: !
:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
Old Blue
13 years ago

early 356 ones look the same.... just as expensive :shock:

ianmac wrote:


Running a vintage Beetle is getting as expensive as running a Porsche:shock:
1956 VW Beetle, 1962 Morris Minor, 1968 VW Beetle (Old Blue), 1972 Morris Mini, 2005 MGTF

Blue, blue, Electric Blue, that's the colour of Old Blue!
GKL 7
13 years ago
pre67vw
13 years ago

purists prefer original:omg: !!!
:twisted: ET

heb623 wrote:



says the guy who wants to put a 356 or Okrasa into his car :rofl:

:twisted:
Rob Amos
Happiness is a stock VW
GKL 7
13 years ago

If the original is missing an Okrasa is a superb substitute.
:oops: I may be a little guilty for suggesting this to ET:oops:
heb623
13 years ago
Maybe I can make Rob happy by saying that I am not[-x going to use an Okrasa kit!
Because more power is needed fo the saxomatic this was my first option!
But now after realising this is not "historical" correct I made the decision it's going to be something else, but I am not going to say what!:p
So patience asked!!!


to George:
Front and back wheel cilinders of 19,05mm. were only used from 3/50 till 5/50
The rear changed into 15,88mm. from 6/50 till 12/53
Front wheel cilinder always were 19,05mm.

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
heb623
13 years ago
:oops:
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
GKL 7
13 years ago




to George:
Front and back wheel cilinders of 19,05mm. were only used from 3/50 till 5/50
The rear changed into 15,88mm. from 6/50 till 12/53
Front heel cilinder always were 19,05mm.

:twisted: ET

heb623 wrote:



Yes,and ?
heb623
13 years ago
1951 - NOS 4 bolt wheel cylined. - £offers
For all split window beetles with hydraulic brakes.
19MM.

The 19mm wheel cilinders are indeed for all split window beetles yes! In front but not in the back!

Right or wrong?

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
GKL 7
13 years ago


For all split window beetles with hydraulic brakes.
19MM. [/i]

The 19mm wheel cilinders are indeed for all split window beetles yes! In front but not in the back!

Right or wrong?

heb623 wrote:




Right,but where does it say it's for the back?
heb623
13 years ago

Right,but where does it say it's for the back?

GKL 7 wrote:



Ok George, it doesn't say , so I assumed you meant they were good for the back too!
I am wrong and you are right, ok?:oops:
Blame it on the language difference:roll:
However I am stilll convinced that my English is better than your Dutch, isn't it?:p

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
vintagebug
13 years ago
https://www.ate.de/generator/www/com/en/ate/ate/themes/30_ate_classic/ate_classic_en,tabNr=4.html  what would be better than the original manufacterer remaking them



Catalogue page 294 on the thumbnails will take you to the Beetle brake parts. I've only glanced at it but unfortunately it looks like they only sell parts from 01/54 onwards :-(

https://www.ate.de/generator/www/com/de/ate/ate/themen/21_kataloge/download/ate_c1_classic_katalog_uv.pdf 


Dave
"When I read about the evils of drinking, I gave up reading"
chthemonkey
13 years ago
im sure if there's a big enough order they'll make them.
heb623
13 years ago
Yeah, maybe when you make an order of 25.000 pieces!!:omg:
Is it not better to order the wheel brake cilinders of a 356, they are still available from 1951!
Maybe not original (but the same:oops: ) but alot cheaper than the making of those ..... other ones!!:shock:

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
Similar Topics
Users browsing this topic