Not that I have seen anywhere.... I'm thinking I might "cheat" and get a day mouldings set made up....
Posted by: JD - 28 June 2014 16:48:27
The Gerson ones seem to be good, from what I´ve seen.
Posted by: bigoval - 02 July 2014 19:13:39
[quote=JD;59170]The Gerson ones seem to be good, from what I´ve seen.[/quote]
The general feeling seems to be that they're OK for early Ovals... but wrong for later ones?
Posted by: JD - 03 July 2014 09:39:05
[quote=bigoval;59179]The general feeling seems to be that they're OK for early Ovals... but wrong for later ones?
[/quote]
You may be right, but personally I'd take slightly wrong steel over glass fibre any day.
Posted by: Lost64 - 03 July 2014 21:50:52
I've used a pair of Gerson's front wings on my 1957 Oval, and apart from finding a good pair of genuine Oval wings, the Gerson units are the best you can get.
The fit is good, the profile over the wheel is better than other repro wings, they have the headlight wire tube fitted, the right side wing is blanked off while the left wing has the cut-out for the horn behind the little grills as per the VW originals. They also have the 'bulge' for the running board, again something some repro wings lack.
If you compare the cost of restoring a rusty original wing,(which would of course be preferable, but when did you last see these for sale at a reasonable price?), the Gerson wings make sense.
Gavin.
Posted by: PRE57VW - 08 July 2014 22:31:13
Just saw these on The Samba
https://www.thesamba.com/vw/classifieds/detail.php?id=1600035
Posted by: Rich Oakley - 09 July 2014 08:22:42
[quote=PRE57VW;59222]Just saw these on The Samba
https://www.thesamba.com/vw/classifieds/detail.php?id=1600035 [/quote]
They're not Oval wings, they're 1959-only wings. I sold a pair of '59 wings in similar-ish condition a couple of months ago for £135.
Posted by: bigoval - 12 July 2014 11:32:37
[quote=Rich Oakley;59223]They're not Oval wings, they're 1959-only wings. I sold a pair of '59 wings in similar-ish condition a couple of months ago for £135.[/quote]
I didn't think they looked quite right for oval wings... I guess that is why they're for sale?
Posted by: pig-pen - 06 January 2015 11:25:37
hey rich! martin here from brighton.
those are my wings for sale
I can guarantee they are off my ribbed door oval, with stratos silver under 3 different paint jobs.
they are for sale because I don't have the finances to fix them properly and I have some repros I am going to use. sacrilege i know, but if it gets the car on the road then so be it.
all inspections welcome to confirm they are march'55
:)
Posted by: Rich Oakley - 06 January 2015 17:36:32
[quote=pig-pen;59836]hey rich! martin here from brighton.
those are my wings for sale
I can guarantee they are off my ribbed door oval, with stratos silver under 3 different paint jobs.
they are for sale because I don't have the finances to fix them properly and I have some repros I am going to use. sacrilege i know, but if it gets the car on the road then so be it.
all inspections welcome to confirm they are march'55
:)
[/quote]
Hi Martin,
How's it going? Good to see you the other week.
I've owned many sets of Oval wings and yours are definitely post Oval :wink: Oval Wings have totally rounded, hemi-spherical headlamp bowls without the flat pressing at the rear. Also, the trailing edge of early oval wings has a large 'flare' where they join the running board. It's most likely that the wings on your car were replaced with 'new' ones very early on in its life (probably 1959!)
All the best,
Rich.
Posted by: pig-pen - 06 January 2015 20:17:18
dammit! you are right. well that sucks, I just assumed they were OG due to the (what I thought was) OG paint underneath. seems like they must be '59 then. I was just about to sell them too! now I need to let him down gently.
Posted by: JD - 07 January 2015 09:24:50
I might be interested in these wings. How much are they now they aren't Oval units? Where can I see some pics?
Posted by: pig-pen - 07 January 2015 09:43:33
hello. It is the fronts that are not oval... the rears are heart light wings for sure, but need a LOT of work. they are pretty much lace under where the stone guards are.
I might have sold the '59 fronts already... will get back to you sir.
if you follow the link to the samba ad then hit 'other ads' or whatever the pics are there
Posted by: bigoval - 04 February 2015 14:05:47
FYI - for those wanting Gerson wings (from Gerson)....
"Sir, the problem with the front fenders is a production one/financial one...it does not make business sense to make those wings using our current manufacturing techniques...it costs us about $500.00 to $1,000 US to make each fender...this is the actual cost of the fender, labor and lost production on other items that make the company money...not good...hence the reason why we do not sell these, or only sell them from time to time...we hope to have this problem solved by the end of the year..."
Posted by: Rocksavage - 08 February 2015 10:30:03
Guys, check this in the for sale section, I have a near perfect right hand side front wing for an Oval window Beetle, finished in green it appears to have never been fitted, some light surface scratching from storage but no issues at all, this one has the tube attached to the headlight bowl with the flange fixing also attached. This really is an almost perfect wing in outstanding condition.
Posted by: pig-pen - 08 February 2015 11:01:53
dunno what is happening to my posts... maybe this one will work.
note to rocksavage... as pointed out above the wing you are selling is '58-'59 as it has the flat section in the headlight bowl. cheers.
Posted by: Rocksavage - 08 February 2015 17:14:35
Pig-pen, thanks for info, is there a website I can reference this on to confirm the age?
Posted by: pig-pen - 26 March 2015 09:54:47
Hello
Delayed response as I thought they were sold.
As far as I know the flat bit in the headlight bowl means '58 and later, and the wiring conduit along with no hole for a peanut indicator suggests a semaphore car so '59 and earlier...
so these are '58-'59 wings. Anyone who thinks I am talking utter bollocks please feel free to chip in.
